Waterborne preprint flexo ink
The series of products are made of imported advanced acrylic resin, emulsion, pigment and special additives, with the following characteristics:
● Bright color, high gloss;
● Rapid drying, good printing adaptability;
● Strong adhesion, three-dimensional sense;
● Wear resistance, light resistance, heat resistance.
一、Productfeatures:
Flexographic waterborne ink series products are mainly used for rotary web letterpress printing of various narrow/wide coated paper and coated paper.
The series of products are made of imported advanced acrylic resin, emulsion, pigment and special additives, with the following characteristics:
● Bright color, high gloss;
● Rapid drying, good printing adaptability;
● Strong adhesion, three-dimensional sense;
● Wear resistance, light resistance, heat resistance.
二、Technical parameter of the products:
| Color hue | PH value | Degree of fineness | Viscosity (Ford cup 4) |
|
Plus or minus 5% Compare test with standard sample |
8.7 + / - 0.5 Instrument: ph meter |
10 or less um Instrument: 0-50 micron scraper fineness meter |
20 seconds + / - 5 Instrument: Zahn Cup 3# viscosity Cup |
三、Instructions
● Please stir the product thoroughly before use to ensure the best effect of the internal ingredients;
● Printing speed: 80-120m/min;
● The remaining parts should be sealed to prevent dust from falling in and crusting;
● Please filter the residual products recovered from the machine and store them separately to ensure that the quality will not be affected when used again;
● Please avoid high temperature or sun during storage, under normal conditions, can be stored for one year without deterioration.
Packing specification: 20 ~ 50kg/ barrel
